Description

MEZON EVO 80 BEC controllers have an aluminum box which helps with efficient cooling.
MEZON EVO 80 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles for users not only of JETI Duplex transmitters, but also of other RC systems.

Features
• full EX telemetry (voltage, current, capacity, revolution etc.)
• setup of device through EX Bus communication from JETI Duplex transmitter
• accurate governor and full support of helicopter models
• F3A mode for acrobatic planes
• adjustable brake with back energy recovering into accumulator
• powerful BEC with adjustable output voltage
• wide range of supply voltage 2 - 12 Lixx (max. 51V)
• bidirectional motor run is possible
• active proportional brake
• effective cooling
• compact dimensions
• user-friendly wizard for quick setup of the controller ("Quick Setup mode")
• in "Expert mode" access to all controller programming options

Parameters

Box	Aluminum
Weight [g]	120
Dimensions [mm]	28 x 25 x 85
Sustained current [A]	80
Supply Voltage [V]	6 to 51
Batteries LiXX	2 to 12
OPTO (optically separated radio signal from the power management)	No
Average Current BEC [A]	15
Peak Current BEC 1s [A]	30
Voltage BEC [V]	5 to 8.4
Telemetry	Yes
Operational temperature [°C]	-10 to 85
Resistance in conducting state [mΩ]	1.2
Cable crossection (input/output) [mm²]	4 / 2.5

Downloads

Instructions for the basic settings of MEZON EVO - Czech

MEZON-EVO-quick-manual-CZ

Instructions for the basic settings of MEZON EVO - Germany

MEZON-EVO-quick-manual-DE

Instructions for the basic settings of MEZON EVO - English

MEZON-EVO-quick-manual-EN

Instructions for the basic settings of MEZON EVO - France

MEZON-EVO-quick-manual-FR

Full manual for MEZON EVO - Czech

Full manual for MEZON EVO - CZ

Full manual for MEZON EVO - English

Full manual for MEZON EVO - EN

Full manual for MEZON EVO - Germany

Full manual for MEZON EVO - DE