Short stick for DS series transmitters.
Long controller stick with potentiometer.
Metal pads for stable and vertical position of the transmitter.
Back Metal Cover for DS 16/14
Plastic tray with high gloss surface for DC series transmitters.
Tray made of transparent blue plastic for DC series transmitters.
Tray for DS series transmitters (except DS-12), matt blue finish.
Car socket charging adapter for Duplex transmitters (except DC/DS-24II).
Plastic tray for DC series transmitters.
Foam insert for aluminium case. This insert is suitable if you are inserting a DC series transmitter with a tray into the case.
Long controller stick for DC transmitters.
Long controller stick with button.
Long controller stick with three-position switch.
Cross strap for convenient and stable hanging of the transmitter in the tray or with transmitter brackets.
Button for mounting instead of a switch.
Silver aluminium case with foam inserts for DC series transmitters
Three-position switch with long stick that returns to the center position for DC series transmitters.
Two-position switch with long stick that returns to the upper position, for DC series transmitters.
Two-position switch with short stick for DC series transmitters.
Three-position switch with long stick that returns to the lower position, for DC series transmitters.
Three position switch with long stick that returns to the upper position, for DC series transmitters.
Silver nut for securing the switches on the front panel of the DC series transmitter.
Two position switch with position lock for DC series transmitters.
Three-position switch with short stick for DC series transmitters.
Two position switch with long stick for DC series transmitters.
Three position switch with long stick for DC series transmitters.
Silver aluminum case for DC transmitter
Foldable transmitter brackets for stable suspension without the use of a tray.
DS 24- Black nuts for upper switches - Front panel
Push button for mounting in place of the switch for DS series transmitters.
Two position switch with mechanical position lock for DS series transmitters.
Two position switch with long stick for DS series transmitters.
Three-position switch with long stick for DS series transmitters.
Three-position switch with long stick that returns to the center position for DS series transmitters.
Two-position switch with long stick that returns to the upper position for DS series transmitters.
Three-position switch with long stick that returns to the lower position for DS series transmitters.
Three-position switch with long stick that returns to the upper position for DS series transmitters.
Two-position switch with short stick for DS series transmitters.
Three-position switch with short stick for DS series transmitters.
Silver aluminium case with foam inserts for DS series transmitters.
Set of extended potentiometer levers on the side of the frame. (both sides)
Set of extended potentiometer slide levers facing up. Allows accessibility of the side potentiometers when the DS transmitter is in the tray.
Replaceable set of springs with higher stiffness for cross controllers.
Tray holder for attaching the transmitter and increasing the stability of the transmitter mounting.
Cable for connecting transmitters in teacher/student mode.
Key for dismounting and replacing switches on the transmitter housing.
Neck strap for hanging the transmitter in the counter or with brackets (2 points).
Neck strap for hanging DS series transmitters.
Self-adhesive flexible pad for comfortable hand position on the tray.
Plastic pads for stable and vertical positioning of the transmitter.
Plug for empty slot after the switch (5 pieces).
Spare accumulator for Duplex transmitters.
Power supply for all transmitters except DC24II.
Cable for outputting the PPM signal to the front panel of the transmitter.
Cable for outputting the PPM signal to the front panel of the transmitter. Stereo for Phoenix simulator.
A pair of spare side knobs.
Silver aluminum case with foam inserts for DS series transmitters.
Replaceable set of springs with standard stiffness for cross controllers.
Long controller stick with two-position switch.
Cover to protect your hands and transmitter from cold and rainy weather.
Tray holder for attaching the transmitter and increasing the stability of the transmitter's mounting arms.
Data cable for Duplex transmitters (except DC/DS24II).
The AddCAP 10AS is an add-on capacitor unit that helps to insure constant voltage for your servos and receiver in large pulse current consumption power systems.
• Duplex backpack for various uses • The possibility of connection with the new DUPLEX bag
• DUPLEX bag for various uses • Adapted for use with DS transmitters
The JETIBOX mini is used for data readout and parameter adjustment of hooked up equipment. Due to small size it can be easily mounted to the transmitter and its clearly arranged backlit display enable...
The cable is intended to extend the servo cable with standard JR/Hitec connectors in length of 120 cm. This extension cable is twisted and has very precise connectors designed for the high current loa...
The cable is intended to extend the servo cable with standard JR/Hitec connectors in length of 30cm. This extension cable is twisted and has very precise connectors designed for the high current load ...
The cable is intended to extend the servo cable with standard JR/Hitec connectors in length of 60cm. This extension cable is twisted and has very precise connectors designed for the high current load ...
The cable is intended to extend the servo cable with standard JR/Hitec connectors in length of 90cm. This extension cable is twisted and has very precise connectors designed for the high current load ...
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support, p...
Cable for connecting the DUPLEX TU module with the transmitter.
Clip for Jetibox
The EXPANDER E2 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 2 sensors to a DUPLEX receiver. The expander...
The EXPANDER E4 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 4 sensors to a DUPLEX receiver. The expander...
Spare pitot tube with 2x1m hose for MSPEED sensor.
Replacement magnetic key for electronic switches from JETI model s.r.o.
The Magnetic switch is an electronic switching device designed to be used as a switch for JETI model products. A big advantage of electronic switches in comparison to mechanical switches is that, in g...
RCSW - RC Switch is a wireless switch designed especially for JETI model products (BEC stabilizers, Central Box and other accessories) that increase the comfort of model control. RC Switch can be easi...
The Expander SW4 is an extension for magnetic and RC switches and is designed for switching multiple devices simultaneously. The JETI model company produces a wide range of devices that can be switche...
Increaser MPX male / 3x JR conector for MAX BEC 2. Conductor cross section 0.5 mm2.
Spare case for holding receiver accumulators.
AddCAP 1640 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your batt...
AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your batte...
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well...
Anti Spark connectors are designed for connection between the drive battery and the controller of electric motors. These connectors are equipped with a circuit to limit the charging current to the cap...
Replacement antenna for TU2 transmitter modules of the DUPLEX 2.4 GHz system.
Replacement cable for JETIBOX.
Mounting kit for installation of the DUPLEX TU2 transmitter module in Futaba FC-16 and FC-18 transmitters.
Mounting kit for installing the DUPLEX TU2 transmitter module in the Graupner MC-19 transmitter.
Mounting kit for connecting an external siren and headphone output to the DUPLEX TU2.
Mounting kit for mounting the Duplex TU2 transmitter module for switching between two modules.
Mounting kit for installing the DUPLEX TU2 transmitter module in Graupner MC-10 and MC-12 transmitters.
Mounting kit for installing the DUPLEX TU2 transmitter module in Graupner MX-16s and MX-12s transmitters.
Mounting kit for installing the DUPLEX TU transmitter module in the Hitec Eclipse 7 transmitter.
EnLink 2RS plus is a device for increasing safety and reliability of radio controled models to the highest level. Parallel connection of systems that are detached maximally leads to the significant in...
