MEZON 40 Pro LMR

Description

Power full MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.
The MEZON PRO LMR is a special lightweight version of the standard controller (without heat sink) which is designed for glider models. Continuous motor run is limited to a few seconds. Then, afterwards, cooling down is necessary.

Parameters

Weight [g]	75
Dimensions [mm]	26 x 18 x 83
Sustained current [A]	40
Peak current (max 30s) [A]	40
Supply Voltage [V]	6 to 51
Batteries LiXX	2 to 12
Max. Current BEC [A]	15
OPTO (optically separated radio signal from the power management)	No
Voltage BEC [V]	5 to 8.4
Telemetry	No
Operational temperature [°C]	-10 to 85
Resistance in conducting state [mΩ]	2 x 1.2
Cable crossection (input/output) [mm²]	2.5 / 2.5