Tray for DS-12 transmitters, glossy black surface.
Replaceable set of springs with standard stiffness for cross controllers.
Tray for DS-12 transmitters.
Long controller stick with potentiometer.
Replacement set of DC transmitter cover screws.
Plastic tray with high gloss surface for DC series transmitters.
Tray made of transparent blue plastic for DC series transmitters.
Car socket charging adapter for Duplex transmitters (except DC/DS-24II).
Plastic tray for DC series transmitters.
Foam insert for aluminium case. This insert is suitable if you are inserting a DC series transmitter with a tray into the case.
Long controller stick for DC transmitters.
Long controller stick with button.
Long controller stick with three-position switch.
Cross strap for convenient and stable hanging of the transmitter in the tray or with transmitter brackets.
Button for mounting instead of a switch.
Silver aluminium case with foam inserts for DC series transmitters
DC 24- Black nuts for upper switches - Front panel
Nut for securing the switches on the front panel of the DC24II transmitter.
Three-position switch with long stick that returns to the center position for DC series transmitters.
Two-position switch with long stick that returns to the upper position, for DC series transmitters.
Two-position switch with short stick for DC series transmitters.
Three-position switch with long stick that returns to the lower position, for DC series transmitters.
Three position switch with long stick that returns to the upper position, for DC series transmitters.
Longer nut for securing switches on the front panel of the DC Series transmitter.
Two position switch with position lock for DC series transmitters.
Three-position switch with short stick for DC series transmitters.
Two position switch with long stick for DC series transmitters.
Three position switch with long stick for DC series transmitters.
Silver aluminum case for DC transmitter
Foldable transmitter brackets for stable suspension without the use of a tray.
• Duplex backpack for various uses • The possibility of connection with the new DUPLEX bag
DUPLEX TX pad underlay
Replaceable set of springs with higher stiffness for cross controllers.
Key for dismounting and replacing switches on the transmitter housing.
Neck strap for hanging the transmitter in the counter or with brackets (2 points).
Self-adhesive flexible pad for comfortable hand position on the tray.
Plug for empty slot after the switch (5 pieces).
Spare accumulator for Duplex transmitters.
Cable for outputting the PPM signal to the front panel of the transmitter.
Cable for outputting the PPM signal to the front panel of the transmitter. Stereo for Phoenix simulator.
Spare duralumin back cover for DC series transmitters.
Long controller stick with two-position switch.
is designed for DC/DS 24II transmitters. This module allows to connect up to six separate controls as switches or potentiometers. The TX-MSW module is installed directly into the transmitter on the ma...
Transmitter expansion module for six buttons or switches for DC/DS transmitters.
Cover to protect your hands and transmitter from cold and rainy weather.
Tray holder for attaching the transmitter and increasing the stability of the transmitter's mounting arms.
Data and charging cable for Duplex DC/DS-24II transmitters. Length 1.5m.
Data cable for Duplex transmitters (except DC/DS24II).
Short stick for DS series transmitters.
Metal pads for stable and vertical position of the transmitter.
Back Metal Cover for DS 16/14
Tray for DS series transmitters (except DS-12), black glossy finish.
Tray for DS series transmitters (except DS-12), matt blue finish.
Silver nut for securing the switches on the front panel of the DC series transmitter.
DS 24- Black nuts for upper switches - Front panel
Push button for mounting in place of the switch for DS series transmitters.
Two position switch with mechanical position lock for DS series transmitters.
Two position switch with long stick for DS series transmitters.
Three-position switch with long stick for DS series transmitters.
Three-position switch with long stick that returns to the center position for DS series transmitters.
Two-position switch with long stick that returns to the upper position for DS series transmitters.
Three-position switch with long stick that returns to the lower position for DS series transmitters.
Three-position switch with long stick that returns to the upper position for DS series transmitters.
Two-position switch with short stick for DS series transmitters.
Three-position switch with short stick for DS series transmitters.
Black nut for securing switches on the front panel of DS series transmitters (2pcs).
Black nut for securing switches on the frame of DS series transmitters (2 pieces).
Silver nut for securing switches on the frame of DS series transmitters (2 pieces).
Silver nut for securing switches on the front panel of DS series transmitters (2 pieces).
The cover contains an MSW module and a button suitable for the F3K category. Up to five additional buttons or switches can be connected to the module.
Silver aluminium case with foam inserts for DS series transmitters.
Switch for DS24II -: Long 2 positions, reversible.
Switch DS24II: Long 2 positions
Switch for DS24II: Long 3 positions
Switch for DS24II: Long 3 positions. Switch with locking in center position.
Switch for DS24II: Long 2 positions, reversible.
Switch for DS24II: Reversible down, 3 positions.
Switch for DS24II: Reversible up, 3 positions.
Switch for DS24II: Short 2 positions.
Switch for DS24II: Short, 3 positions.
• DUPLEX bag for various uses • Adapted for use with DS transmitters
Set of extended potentiometer levers on the side of the frame. (both sides)
Set of extended potentiometer slide levers facing up. Allows accessibility of the side potentiometers when the DS transmitter is in the tray.
Tray holder for attaching the transmitter and increasing the stability of the transmitter mounting.
Neck strap for hanging DS series transmitters.
Plastic pads for stable and vertical positioning of the transmitter.
Set of screws for securing the rear cover of DS series transmitters (except DS-12).
Set of screws for securing the rear cover of the DS-12 transmitter.
A pair of spare side knobs.
Silver aluminum case with foam inserts for DS series transmitters.
Switch for DS24II: 2 positions with lock
Protective bag with strap for DS series transmitters.
