The JETI DC/DS transmitter system allows to report any telemetry data immediately or repeatedly according to a user-defined time.
You can select two different switches in the "voice output" transmitter settings under "telemetry". In the figure below, we have selected the Sc switch for repeated reports and the Sg switch for immediate (trigger) telemetry data reporting. In the menu "sensors, variables" there are two columns with telemetry data from all connected sensors. Both column is for the specified Sc (repeat) or Sg (trigger) switch. If we activate the Sc switch the transmitter will repeatedly report the selected telemetry data in a time interval of 30 s (the exact time can be set by user). If we activate the Sg switch the transmitter will immediately report the telemetry data selected in the "trigger" column.
For all telemetry data it's possible to select their "priority" (during report). If we don’t choose the priority the transmitter will report the selected data "from top to bottom".
