LMR (Limited Motor Run) - the controller is especially designed for lowest possible weight. This series is not in a metal box and is intended primarily for glider models where continuous motor run is...
MEZON EVO 50 BEC controllers have an aluminum box which helps with efficient cooling. MEZON EVO 50 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles fo...
*LMR (Limited Motor Run) - the controller is especially designed for lowest possible weight. This series is not in a metal box and is intended primarily for glider models where continuous motor run i...
MEZON EVO 80 BEC controllers have an aluminum box which helps with efficient cooling. MEZON EVO 80 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles fo...
MEZON EVO 85 OPTO controllers have an aluminum box which helps with efficient cooling. MEZON EVO 85 OPTO is a completely universal controller for models of airplanes, helicopters, ships and vehicles ...
SB: Switching BEC. HS: High Speed. Suitable for high RPM motors.
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well...
SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of B...
Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 ...
The SPIN Pro 165 OPTO controller is intended for controlling BLDC motors. The parameters of the controller can be set by JETI BOX. The controller can be set up in three mode: normal (aircraft), fas...
The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of...
Mezon 115
MEZON 120
MEZON 120 Lite
MEZON 130
MEZON 130 Lite
Mezon 135 Opto
MEZON 135 opto Lite
MEZON 160 Lite
MEZON 165 opto Lite
MEZON 90
MEZON 90 Lite
MEZON 95 OPTO
MEZON 95 opto Lite
AddCAP 1640 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your batt...
AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your batte...
Anti Spark connectors are designed for connection between the drive battery and the controller of electric motors. These connectors are equipped with a circuit to limit the charging current to the cap...
• Duplex backpack for various uses • The possibility of connection with the new DUPLEX bag
• DUPLEX bag for various uses • Adapted for use with DS transmitters
JETIBOX is a universal communication terminal which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible (JBC) products use powerful software to allow easy setup a...
The USB Adapter transfers information between a PC and Jeti model products. It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support, p...
